Advertisement
Procedure 36
Step 1: Remove all grates and
burner components
Step 2: Remove three slot screws
per each burner base and allow the
burner base to gently drop into the
stove's cavity
Step 3: Metro only. Remove
screws holding burner bowl against
sides of stove top
Step 4: Pull on burner bowl
upwards as straight as possible to
free from stove
Step 5: Replace with new burner
bowl- please reinsert as vertical as
possible.
Step 6: Reattach burners to new
burner bowl by pulling center of
burner base upwards and lining up
screw holes.
- Burner Bowl Replacement
Step 7: Legacy Models. Remove
three slot screws per each burner
base and allow the
burner base to gently drop into the
stove's cavity.
Step 8: Prop stove top (Procedure
35) and remove nuts holding
burner bowls to studs underneath
stove top.
Step 9: Replace with new burner
bowl
Step 10: Reattach burners to new
burner bowl
56
Section 5-3
MLSM2003-01-03
Hide quick links:
Advertisement
