Advertisement
Section 5-3
Procedure 12
- Oven Door Gasket
Step 1: Remove oven door
(Procedure 33) . Place door face
down on soft surface to prevent
scratching porcelain.
Step 2: Loosen four corner screws
from inner door panel and remove
damaged gasket (note" gasket has
an inner and outer loop)
Step 3: Insert new gasket starting
from one bottom corner and loosely
tighten first screw.
Step 4: Work your way around the
perimeter tightening the corner
screws as the gasket is being fed.
Step 5: Ensure gasket is even
throughout and tighten all screws.
Note: When placing door back
onto stove, insert hinges into
receivers and open door fully.
Disengage brass catches prior to
closing door. Failure to do so will
damage the hinges. See Procedure
33 for full details.
MLSM2003-01-03
28
Hide quick links:
Advertisement
