Advertisement
Procedure 34
Step 1: Disconnect power supply
to the range.
Step 2: Remove oven door (see
Procedure 33)
Step 3: Remove control knobs by
pulling away from stove
Step 4: Remove metal plugs
located on underside of control
panel using a thin "slot" screwdriver
– please take care not to scratch
the surface.
- Control Panel Removal
Step 5: Use 3/8" extended
socket nut driver to loosen nuts
holding control panel to top. The
control panel is fastened with 2 or 4
nuts (for 30" and 36" models
respectively) to studs welded to the
stove top. Use of a flashlight will
help in seeing the nuts first and
then it will be easier to "feel" the
nuts with the driver.
Step 6: Once nuts are loose, pull
control panel away from stove.
Step 7: For easier work, pull top
rack out of oven and place
protective cloth on it to allow control
panel to rest without scratching.
54
Section 5-3
MLSM2003-01-03
Hide quick links:
Advertisement
