Advertisement
Procedure 15
Step 1: Press "light" symbol on
control panel - a clicking noise
should be heard from the back of
range. If clicking noise audible yet
lights do not turn on, replace light
bulbs.
Step 2: Disconnect power supply
to range.
Step 3: To replace bulb, remove
oven racks and rack supports (see
Procedure15)
Step 4: With fingers, pry on edge
of glass covering
Step 5: Remove light bulb by
pulling straight out.
Step 6: Without touching lens of
new bulb (use cloth), insert into
socket (if lens has been touched,
clean with rubbing alcohol first)
Step 7: If bulb tests in good order
however oven light does not
operate, check light housing.
Step 8: Pull unit away from wall
and remove range's back panel
(see Procedure 32).
- Oven Bulb
Step 9: Inspect for signs of
damage at light transformer. Test
transformer for continuity across
terminals. If faulty, replace.
Step 10: Disconnect wires from old
transformer and place in new one.
Step 11: If Transformer is in good
order, check wiring to light housing
to ensure molex plug is not loose or
damaged.
Step 12: With insulation moved
aside, test wiring continuity with
multimeter probes. If faulty,
replace.
Step 13: Test housing to ensure in
good condition with a multimeter
(with wires disconnected from
housing, place each test probe on
the two leads and test for
continuity).
31
Section 5-3
MLSM2003-01-03
Hide quick links:
Advertisement
