Advertisement
Section 5-3
Procedure 35
- Stove Top Prop Up
Step 1: Disconnect power supply
to the range.
Step 2: Loosen top row and two
middle screws from the stove's
back panel to allow the spark
modules to clear the back panel.
Step 3: Pull stove top upwards by
holding the front of the stove top
and the back and pulling upwards.
A gentle tap may be needed to
dislodge the pems holding the top
to the stove's side panels.
Step 4: Note that the flexible gas
line may get stuck on the stove's
back opening and impede the
pulling of the stove top – gently feed
the gas line through the hole.
Step 5: Use padded spacers or
two short 2x4 pieces to
prop top while working.
MLSM2003-01-03
55
Hide quick links:
Advertisement
