Advertisement
Procedure 33
Step 1: Open door fully.
Step 2: Latch the brass catches
onto the upper leg of the hinge by
pulling forward and catching the
small hook.
Note: ensure catch is securely in
hinge before attempting to remove
door or damage will occur to hinge.
- Oven Door Removal
Step 3: With one hand on each
side of door, lift door up and at a 30
degree angle in one sweeping
motion.
Note: Door weighs approximately
40 lbs (18 kgs). Exercise caution
when removing. Place door with
handle facing down on protected
surface.
Step 4: Whan placing door back
onto range, insert hinges into
receivers as far in as possible.
Step 5: open door fully and
disengage brass catches
completely. With brass catches out
of the way, close door slowly (some
snapping sound may be heard as
springs settle). FAILURE TO
FOLLOW THESE PROCEDURES
WILL DAMAGE DOOR HINGES -
causing door seal leaks.
53
Section 5-3
MLSM2003-01-03
Hide quick links:
Advertisement
