See the Regulatory Notices for all regulatory and safety guidance prior to configuration.
Avant de procéder à la configuration, veuillez consulter les Avis de réglementation, afin de prendre connaissance des recommandations en matière de sécurité et de réglementation.
Get Started
Before you begin, make sure that you have the following:
•
Network preparation (See
Prepare your environment for Microsoft Teams
•
Microsoft Teams Room License (See your Office 365 Admin Center and
•
Account credentials (See
Configure accounts for Microsoft Teams
•
USB keyboard and mouse
•
Display HDMI cable(s)
•
Phillips #1 screwdriver and flathead screwdriver
Unpack the Poly GC8, Conferencing PC, 10 m USB-A to USB-C cable, and mounting kit (if applicable) from their boxes.
Page 1
USB keyboard and mouse • Display HDMI cable(s) • Phillips #1 screwdriver and flathead screwdriver Unpack the Poly GC8, Conferencing PC, 10 m USB-A to USB-C cable, and mounting kit (if applicable) from their boxes. support.polycom.com/mtrsetup For support, go to Poly Support.
Page 2
1. (Optional) Mount the Conferencing PC using the mounting kit. Refer to the Poly G10 12. Plug in and power on the Poly GC8 and then plug in and power on the other Series, Poly G40 Series, and Poly G85 Series PC Mounting Kit Setup Sheet.
Page 3
This product cannot be connected directly to the telecommunications circuits (or public wireless LANs) of any telecommunication carriers (e.g., mobile communications carriers, fixed communications carriers, or internet providers). In the case of connecting this product to the Internet, be sure to connect it via a router.
Need help?
Do you have a question about the G10-T and is the answer not in the manual?
Questions and answers