Live Video Mode - Eneo PNR-5332/3TB Quick Installation Manual

top of the screen.
2
On the Site panel, click on All Devices, then click on the
button at the bottom of the Site List panel on the
right. A Device Scan window will appear on the screen.
E
3
After selecting a scan mode, click on Start Scan button
and the scan results will be displayed on the list.
4
Click Add Devices at the bottom of the Device Scan
window.
5
When user authentication window appears, enter the
User ID and Password set up on each device, and then
select OK for remote access.
12
6
Click Device Group on the Sites panel and click
the bottom. Add Device Group window will appear.
● Name: Enter a name for the device group.
● Location: Select a location for the subject device
group.
When you select a device from the device List on the
left, it will be added to the Selected Device List on the
right. Click OK to register the device group.
7
Make sure that the device has been added to the device
group correctly. Click Device Group on the Sites panel
and click on next to Device Group. When you click
on a registered device group, a list of devices added the
selected device group will be displayed on the right.
To modify a device group that has been registered, select
a device group and click
panel. Modify Device Group window will appear. You
can modify the selected device group from this window.

Live Video Mode

1
In the Site List, make sure that the device has been added
to the device group.
2
In the panel tabs, click the Live tab. In the Site list, select
a zone you wish to connect to. Then, drag & drop the se-
lected site on the Live screen using your mouse. The live
video of the selected site will be displayed on the screen.
at
on the bottom of the Sites
E
E