Lorawan Settings" Tab - Vega Absolute M-BUS-2 User Manual

M-BUS-2 / User Manual

"LORAWAN SETTINGS" TAB

The "LoRaWAN Settings" tab allows you to configure various parameters of the LoRa
network.
Region - allows you to select one of installed frequency plans or specify a custom
frequency plan. Custom frequency plan is EU-868 based.
The converter supports the following frequency plans:
Frequency plan
2
EU-868
RU-868
Custom
In the EU_868 and RU_868 frequency plans, only those channels are active by default,
on which sending requests for connection to the network (join channels). The remaining
channels (that the device should use) can be transferring by the LoRaWAN network server
during the device activation procedure (only OTAA).
2
By default, the device supports two frequency plans and the custom, but it is possible to order firmware for
other frequency plans: IN865, AS923, AU915, KR920, US915, KZ865
Revision 09- 06 July 2021
Channel
1
2
3
RX2
1
2
RX2
Set with «Vega LoRaWAN Configurator» application
Frequency
868.1
868.3
868.5
869.525
868.9
869.1
869.1
Modulation
MultiSF 125 kHz
MultiSF 125 kHz
MultiSF 125 kHz
SF12 125 kHz
MultiSF 125 kHz
MultiSF 125 kHz
MultiSF 125 kHz
19