Device Info" Tab - Vega Absolute M-BUS-2 User Manual

M-BUS-2 / User Manual

"DEVICE INFO" TAB

The "Device info" tab displays information about the device, its current status, and also
the data needed to register the device in the LoRaWAN network.
ABP info - displays the data necessary to register the device in the LoRaWAN network
with ABP method (Activation By Personalization).
OTAA info - the data required to register the device in the LoRaWAN network with OTAA
method (Over The Air Activation) is displayed.
Key management (not displayed in the "Simple" mode) - allows you to change the
factory keys to register the device on the network and reset the keys back to the factory
settings.
Device info - the configurator reads information about the device model, its firmware
and automatically corrects the device's time when connected to it.
Revision 09- 06 July 2021
17