Vega Absolute M-BUS-2 User Manual page 27

M-BUS-2 / User Manual
With this configuration, the work will proceed as follows: every hour, two commands
will be transmitted one after the other. Only the second command will be sent to the server
via the radio channel, so the confirmation receipt 0xE5 will not be sent.
In the logs of the configurator, this procedure will look like this:
Time to warm-up meters 1621907648
Send user m-bus command:
Received data: E5
Poll meter OK
Send user m-bus command:
Received data: 68 54 54 68 08 45 ...
Poll meter OK
Here Received Data: E5
Here Received Data: 68 54 54 68 ...
command. Only this packet will be broadcast, the E5 receipt will be ignored.
Revision 09- 06 July 2021
– is confirmation receipt for the first command.
– is payload response of the meter to the second
27