Default Device Settings - Vega Absolute M-BUS-2 User Manual

DEFAULT DEVICE SETTINGS

PARAMETER
Frequency plan
Activation type
Adaptive Data Rate (ADR)
Confirmed Uplinks
Rx 1 delay
Join accept delay
Uplink number of transmissions
Data rate
Power
Communication period
Data collection period
Time zone
For changing the device settings, you need to connect to it with "Vega LoRaWAN
Configurator" application. You can download app on the iotvega.com site in SOFT section as
well as User Manual for configurator.
8
RU868
ABP or OTAA
ON
OFF
1 second
5 seconds
1
DR0
14 dBm
24 hours
24 hours
UTC +00:00
Go to the app page.
M-BUS-2 / User Manual
VALUE
Revision 10 - 13.10.2021