Navigating Within The Menu - Elster themis plus Operating Instructions For Consumers

User keys, selection key and symbols
▷ You can navigate through the menu using the
user keys , and the selection key
Symbol Meaning
Navigate to the left or the right on each
,
level using the user keys.
Briefly pressing the selection key selects
a sub-menu.
Holding the selection key pressed down
switches the display back to the previous
menu.
Briefly pressing the selection key selects
a sub-menu.
Holding the selection key pressed down
switches the display back to the previous
menu.
Keys inactive
, ,
RF module/communication is active
= RF module/communication is inactive
=
=
RF communication – pairing successful
Invalid data
Alarm
Low index battery. This symbol is only
displayed when battery power is low.
Temperature out of operational range
T
Pressure out of operational range
p
Multiple sensor data out of operational
*
range
▷ In each menu, the meaning of the symbols for
the keys is described in the information area.
▷ In the main screen under "General instructions",
all the symbols are explained.

Navigating within the menu

▷ The menu is constructed hierarchically.
▷ The "Current meter reading" main screen appears
when switching on the index.
▷ If you are in a different menu, the display will
automatically change back to the main screen
when no user key has been pressed for 30 s,
and switches off after a further 30 s.
▷ You can navigate from the main screen to the
various menus, such as "Date and time (UTC)"
using the user keys
.
, .
Menu overview
–
Current meter reading
–
Date and time (UTC)
Past meter readings
–
–
Tariff information
–
Billing information
–
Metering point identification
Current meter reading
▷ UTC = coordinated universal time + X = offset
for conversion to local time.
▷ The absolute meter reading and optionally the
current tariff are indicated in the main screen.
▷ This appears when switching on the index.
▷ You can receive information about the symbols by
pressing the selection key
, , or see page 3 (User keys, selection
key and symbols).
Date and time (UTC + X)
▷ Information on the date and time display.
▷ The current date and time appears when the
selection key
▷ Local time is supported.
▷ Daylight saving time can be supported.
▷ For further information, contact the meter op-
erator.
*Date and time: (UTC + X)
20–04–2013
07:15:30
▷ The date is given in the format DD-MM-YYYY.
GB-3
General instructions
Monthly
Daily
Hourly
and the user keys
is pressed.