Appliance Maintenance; Air Filter Maintenance; Maintenance After Use - Whirlpool AMD 061 Instructions For Use Manual

Portable air conditioner with green gas
Table of Contents

Advertisement

MAINTENANCE

Appliance maintenance

Unplug from the power supply
Stop the appliance before unplugging.
Wipe with a soft, dry cloth
Use lukewarm water (below 40°C) to clean the appliance when it is very
dirty.
• Use a dry, soft cloth to clean it.
Never use volatile substances such as gasoline or polishing powder to
clean the unit.
Never sprinkle water on the indoor unit
• Danger! Electric shock!

Air filter maintenance

It is necessary to clean the air filter after approx. 100 hours of operation.
Clean it as follows:
Stop the appliance and remove the air filter
1. Stop the appliance first, then remove the air filter by pulling it upwards.
Clean and refit the air filter
2. If the filter is very dirty, clean it with a solution of lukewarm water and
neutral detergent. After cleaning, dry it in a cool, shaded place then refit
it.
IMPORTANT:
Clean the air filter every two weeks when the air conditioner is used
in a dusty environment.

Maintenance after use

1. If the appliance is not going to be used for a long time, pull the rubber plug out of the drain port to drain all remaining
water from the appliance.
2. Run the air conditioner in fan only mode for 12 hours on a sunny day to dry the inside of the appliance.
3. Stop the appliance, unplug it, remove the batteries from the remote control then store appropriately.
4. Clean the air filter and refit it.
5. Remove air hoses, store appropriately and cover the hole tightly.
29

Advertisement

Table of Contents
loading

Table of Contents