Setting The Printing Paper - Citizen CBM-292 User Manual

4.6 Setting the Printing Paper

(1) Open the front cover.
(2) Cut the end of the paper almost at a right angle.
(3) Check the paper winding direction, and set the paper in the paper holder inside the case.
(4) Insert the end of the paper straight into the paper inlet of the printer mechanism.
automatically inserted.
(5) Remove slack from the paper, and close the front cover.
(6) Press the FEED switch to feed the paper as required.
* The printing head is kept up at the time of shipment.
the printing-head-up state.
* Note that if there are data remaining in the printer buffer, printing will start after auto-loading
(automatic insertion).
CAUTION:
If the set paper is slanted or not properly fed, move up the printing head, remove the paper gently, and
insert it again.
When replacing the paper, move up the printing head and pull out the remaining paper gently.
Shift the head up lever to the near side, to lower the printing head.
25
CBM-292/293 User's Manual
The paper cannot be automatically inserted in
The paper will be
CITIZEN