Setting The Scrap Box; Setting The Paper Tray - Citizen OP900 II User Manual

Setting the Scrap Box

CAUTION
・ When the scrap box is removed, do not insert your fingers in the cutter at the top. They could be
cut or severed.
・ As prints are cut, the scrap box fills with scrap paper. Be sure to empty it when you change the
paper and ribbon. If it becomes over-filled with scraps, it could cause problems with the printer.
・ Exchange the paper and ribbon as a set, in order to avoid a trouble.

Setting the Paper Tray

1. Attach the Paper Tray to the Scrap Box.
※The tray can hold about 50 photos, but please remove them frequently.
CAUTION
・ Use with sizes other than L or PC, or allowing too many photos to accumulate could cause problems.
Moreover, there is a possibility that a paper tray may be damaged.
・ Open and close a paper tray softly. There is a possibility of damaging if unreasonable power is
applied.
Paper Tray
16
Setting Up the Printer