Table of Contents
Advertisement
ESC
G
n
[Function]
[Code]
[Range]
[Outline]
[Caution]
[See Also]
[Sample Program]
[Print Results]
ESC
J
n
[Function]
[Code]
[Range]
[Outline]
[Sample Program]
[Print Results]
Specifying/canceling Double Printing (ESC G n)
<1B>H<47>H<n>
{0 n FF}
Data is described in Hex code.
Specifying/canceling the double printing.
"n" is valid only for the lowest bit (n0).
Control by n is shown as follows.
n0
0
1
This is effective to all characters.
The print result of Double printing and highlight character printing is completely
same.
ESC E
LPRINT CHR$ (&H1B) + "G" + CHR$ (0) ;
LPRINT "AAABBB" + CHR$ (&HA) ;
LPRINT CHR$ (&H1B) + "G" + CHR$ (1) ;
LPRINT "AAABBB" + CHR$ (&HA) ;
Printing and feeding paper n/203 inch
<1B>H<4A>H<n>
{0 n FF}
Data is described in Hex code.
Prints data inside the print buffer and feeds paper by n/360 inch.
mechanical pitch is 1/203 inch, it is internally converted approximate to the value
specified with this command.
Specified volume does not remain.
The beginning of the line is to be considered as the next printing start position.
Initial value is not defined.
See Sample Program and Print Results for ESC 2 on Page 51.
Type
Canceling double printing.
Specifying double printing.
57
CBM-292/293 User's Manual
Since an actual
CITIZEN
Advertisement
Table of Contents
