Table of Contents
Advertisement
4.2 Connecting the Power Source and Data Cable
(1) Make sure that the main power source is turned off.
(2) Connect the accessory data cable firmly, making sure of its direction and wiring.
A connecting position is located on the back of the main body.
(3) Plug the accessory AC adapter into a connector until it is locked.
(4) Ground the frame of the main body as required, to prevent noise, static electricity, and so on.
grounding conductor firmly to the ground terminal on the back, using a screw.
CAUTION :
Note that the main body is turned on by plugging in an AC cord.
Never connect the grounding conductor to a gas pipe.
When disconnecting / reconnecting the cable, hold it by the base, as it can snap if held by the cable itself.
23
CBM-292/293 User's Manual
Secure a
CITIZEN
Advertisement
Table of Contents
