Error Codes - Midea MLH27N5AWWC User's Manual & Installation Instructions

Problems
•
The display
panel
•
does not light
•
Items are still
•
dirty after
•
washing
•
Load is too
wet at the end
•
of the cycle
•
Load has too
many suds
•
•

ERROR CODES

Code
Reason
E30
Door open
Water injecting
E10
problem while
washing
E21
Washer doesn't
drain
Water overflow
E12
EXX
Other
Solutions
Make sure that the power cord is connected to a
working outlet.
Contact a qualified repair professional to check the
display panel wiring.
Make sure that you do not overload your washer.
Make sure that you use the correct amount of detergent.
If items are extremely dirty, try washing them a second
time.
Use a high-efficiency detergent to reduce over-sudsing.
See Select a detergent on page 27.
The load may be too small. Very small loads (one or two
items) may become unbalanced and not spin out
completely.
Use a high-efficiency detergent to reduce over-sudsing.
See Select a detergent on page 27.
If you have "soft" water, reduce the amount of
detergent.
For small or lightly soiled loads, reduce the amount of
detergent.
•
Open, then close the door.
•
Make sure that no items are caught between the
door and your washer.
•
Make sure that the water pressure is not too low.
•
Straighten the water hose, if necessary.
•
Make sure that the inlet valve filter isn't blocked.
•
Make sure that the drain hose is not blocked.
•
Restart you washer.
•
Try restarting your washer. If the error remains
or a different error code is displayed, contact
qualified service personnel.
Solutions
41