Error Codes - Midea MLTW44A4BWW User's Manual & Installation Instructions

Problem
Load is too wet
at the end of
the cycle
Water leaks
Oversuds
condition
Prevent odor

ERROR CODES

Description
E1
42
Solutions
•
sudsing. See Selecting a detergent on page 29.
•
The load may be too small. Very small loads (one or
two items) may become unbalanced and not spin out
completely.
•
Make sure that all hose connections are tight. See
Connect the water hoses on page 19 and Connect the
drain hose on page 22.
•
Make sure that the end of the drain hose is correctly
inserted and secured to the drainage system. See
Connect the drain hose on page 21.
•
Avoid overloading.
•
sudsing. See Selecting a detergent on page 29.
•
sudsing. See Selecting a detergent on page 29.
•
If you have"soft" water, reduce the amount of
detergent.
•
For small or lightly soiled loads, reduce the amount of
detergent.
•
Periodically run a Tub Clean cycle to clean the tub.
See Cleaning the tub on page 38.
•
sudsing. Excessive suds collect in nooks and crannies
and cause odor. See Selecting a detergent on page
29.
•
Dry the interior of your washer after the total cycle
has finished.
Reason
Your washer takes more
than 30 minutes to fill
With water at the low
water level, 45 mins at
medium water level, or
60mins at the high water
level.
Solutions
•
Make sure that the lid is
not open.
•
Make sure that water
is not leaking. See No
water or not enough
water on page 40.
•
Contact Midea service
center.