Connect The Drain Hose - Midea MLH27N5AWWC User's Manual & Installation Instructions

5. Tighten the fittings by hand until they are snug, then tighten them an
additional two-thirds of a turn with pliers or a wrench.
Caution
•
Don't overtighten the fittings or apply tape or sealant to the faucets
or water supply intakes. This can damage the fittings.
•
Make sure that the water supply hoses aren't twisted or bent. A bent
or twisted hose can leak and cause an electric shock because of water
leakage.
6. Turn on the hot and cold water supplies, then check all the water supply
intake connections and the faucets for water leaks.

Connect the drain hose

Caution
•
Make sure that the connection between the drain hose and the wash
basin, standpipe, or laundry tub is not airtight.
Connect the drain hose in one of the following ways.
In a wall standpipe
NOTE: The wall standpipe drain requires a minimum diameter standpipe
of 2" (5 cm).
Place the drain hose into the wall standpipe. You can use a nylon ties (not
included) to bundle the hoses and the drain pipe together.
20
Wall standpipe
Drain hose
Nylon tie