Midea MLH27N5AWWC User's Manual & Installation Instructions page 35

Cleaning the inlet filters
If water flows too slowly or not at all, you need to clean the inlet filter.
Machine filter
•
Turn off the water faucets.
•
Unscrew the inlet pipe on the back of your washer from the tap.
•
Pull out the filter with long nose pliers.
Bakc of washer
•
Use water to wash the filter.
•
Reinstall the filter, then reconnect the inlet pipe.
•
Turn on the water faucets and make sure there is no water leakage.
Cleaning the drain filter
Caution
Clean the filters frequently. Blocked filters may:
•
Keep your washer from draining water
•
Keep your washer from spinning
•
Cause loud or unusual noises from object caught in the filters
Inlet filter
35