Midea MLH27N5AWWC User's Manual & Installation Instructions page 19

Caution
Don't overtighten the fittings or apply tape or sealant to the faucets or
water supply intakes. This can damage the fittings.
3. Place the unconnected ends of the hoses into a bucket and turn on the
faucets connected to the water supply hoses for 10 or 15 seconds to
remove any foreign substances. Turn off the faucets.
4. Connect the ends of the water supply hoses to the water supply intake
connections at the top of the washer. The water supply hose connected
to the hot faucet must be connected to the hot water supply intake
and the water hose connected to the cold faucet must be connected
to the cold water supply intake.
Back of washer
NOTE:
•
If you don't want to use the hot water faucet or you don't have a hot
water faucet, you have to adjust the Temp. setting to cold, or your
washer will have an Error code E10.
•
If you only have cold water faucet, we recommend that you buy and
install a T-branch pipe.
Hot water supply
Cold water supply
Water supply hoses
19