Tools You Will Need; Connect The Water Hoses - Midea MLH27N5AWWC User's Manual & Installation Instructions

Tools you will need

3/8" open-end wrench
Pliers

Connect the water hoses

Caution
•
Use new water supply hoses. Using old hoses can result in leakage or
overflow that can damage your property.
•
Do not connect multiple water supply hoses together to increase the
length of the hose. Hoses connected this way can leak and cause
electrical shock. If a hose is too short, replace the hose with a longer,
high-pressure hose.
1.
Connect the water hoses to the hot and cold water faucets.
2. Tighten the hose and faucet fittings by hand until they are snug. Tighten
them an additional two-thirds of a turn with pliers or a wrench. Pull the
water supply hoses downwards to make sure that they are connected
securely.
18
Level
Nut driver with ratchet
Water supply hose
Adjustable wrench or 7/16"
socket with ratchet
Adjustable wrench or 9/16"
open-end wrench