Table of Contents
Advertisement
Connecting KDS-8-MNGR
Always switch off the power to each
KDS-8-MNGR. After connecting your KDS-8-MNGR, connect its power and then switch on
the power to each device.
To connect KDS-8-MNGR as illustrated in the above example:
1. Connect an HDMI acceptor to the HDMI OUT connector
2. Connect the USB port to a USB Hub
3. Connect Ethernet LAN 2 RJ-45 connector
to a laptop.
Alternatively, you can connect LAN 2 directly to a laptop.
4. Connect Ethernet LAN 1 (PoE) RJ-45 Connector
connected to KDS-8 (or KDS-8F) encoders and decoders.
5. Connect the 5V DC connector
If the unit is powered via PoE (PD) there is no need to connect the power
adapter.
KDS-8-MNGR – Connecting KDS-8-MNGR
KDS-8
device before connecting it to your
Figure 3: Connecting to the KDS-8-MNGR
8
that is connected to a keyboard and mouse.
12
power adapter to the device and the mains electricity.
7
.
9
to a 1G Network switch that is connected
10
to a 10G Network switch that is
Kramer Electronics Ltd.
7
Advertisement
Table of Contents
