4.2 Your Tp-43 Component - S/Pdif Transceiver Underside; Connecting The Tp-43 Component - S/Pdif Transceiver; Figure 4: Tp-43 Component - S/Pdif Transceiver Underside; Table 2: Tp-43 Component - S/Pdif Transceiver Underside Features - Kramer TP-43 User Manual

Connecting the TP-43 Component – S/PDIF Transceiver
4.2 Your TP-43 Component – S/PDIF Transceiver Underside
Figure 4 and Table 2 define the underside of the TP-43:
Figure 4: TP-43 Component – S/PDIF Transceiver Underside
Table 2: TP-43 Component – S/PDIF Transceiver Underside Features
# Feature
1
2
3
4
5
6
7 LEVEL
8 EQ.
9 V Trimmer
10 U Trimmer
11 Y Trimmer
12 S/PDIF Trimmer
5 Connecting the TP-43 Component – S/PDIF Transceiver
This section describes how to connect:
The TP-43, see section 4.1
An extended Component – S/PDIF distribution system by
connecting three TP-43 units between the TP-41 and the TP-42,
see section 4.2
1 Insert a screwdriver into the small hole and carefully rotate it, trimming the level
1
Y Trimmer Adjusts the Y output signal level
1
U Trimmer Adjusts the U output signal level
1
V Trimmer Adjusts the V output signal level
1
Y Trimmer Adjusts the cable compensation equalization level for output Y
1
U Trimmer Adjusts the cable compensation equalization level for output U
1
V Trimmer Adjusts the cable compensation equalization level for output V
1
Adjusts the digital audio signal level
1
Adjusts the digital audio output cable compensation equalization level
1
Adjusts the V line output signal level
1
Adjusts the U line output signal level
1
Adjusts the Y line output signal level
1
Adjusts the S/PDIF digital audio line output signal level
Function
5