S/PDIF Transceiver, which is designed to be used with the TP-41 Component – S/PDIF transmitter and the TP-42 Component – S/PDIF receiver. The TP-43 is also suitable for utilizing existing UTP cabling that results in an efficient, fast and uncluttered environment for:...
Individual level and EQ. controls for the Y, U, and V signals, as well as audio level and EQ. controls The TP-43 Component – S/PDIF Transceiver is designed to be used with the TP-41 and the TP-42. When using three TP-43 units between the TP-41 / TP-42 pair, the maximum range of the system via UTP cabling can be extended to up to 1200ft (400m).
For a description of the TP-43 Component – S/PDIF Transceiver: Topside, see section 4.1 Underside, see section 4.2 4.1 Your TP-43 Component – S/PDIF Transceiver Topside Figure 1, Figure 2, Figure 3, and Table 1 define the topside of the TP-43: Figure 1: TP-43 Component – S/PDIF Transceiver...
(for example, a plasma display) S/PDIF (digital audio) RCA OUTPUT connector to an AV Receiver 2. Connect the LINE IN connector of the TP-43 to the LINE OUT connector of the TP-41, via UTP cabling (maximum range of 300ft (100m)).
Connecting the TP-43 Component – S/PDIF Transceiver 5.2 Connecting an Extended Component – S/PDIF Distribution System To configure a TP-41 / TP-42 / TP-43 extended Component – S/PDIF distribution system (up to 1200ft (400m)), as the example in Figure 6 illustrates: 1.
Connecting the TP-43 Component – S/PDIF Transceiver 5.3 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors Table 3 and Figure 7 define the CAT 5 PINOUT, using a straight pin to pin cable with RJ-45 connectors: Table 3: CAT 5 PINOUT...
0.3 kg (0.67 lbs.) approx ACCESSORIES: Power Supply 1 Specifications for CAT5 UTP cable 60m (TP-41 to TP-43) and 30m (TP-43 to TP-42), unless otherwise specified 2 Specifications are subject to change without notice 3 For video and audio 4 Repeater section...
Page 14
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 15
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the TP-43 and is the answer not in the manual?
Questions and answers