Turning Ac On - OutBack Power GTFX Series Programming Manual

TURNING AC ON

BYPASS OUTPUT INPUT
Verify the AC voltage output through the MATE following path:
PATh
MAIN------- STATUS------------
12.15:30p choose device:
SUM STATUS SETUP ADV FX CC DC MAIN MODES METER BATT PG2
STATUS/FX/PAGE1---------- Invert Bulk
choose category: inv 0.0kw
chg 0.0kw buy 0.0kw
DOWN
• With the programming completed,
turn the AC output breakers ON with
the AC BYPASS on the AC breaker
panel switched to NORMAL.
P00 STATUS/FX/METER--P00
zer 0.0kw output
voltage
STATUS PORT DOWN UP TOP PORT
230 vac
15