Using Do Not Disturb - Cisco CP-7941G-RF Phone Manual

Tips
• Enter the call forward target number exactly as you would dial it from your phone. For example,
enter an access code or the area code, if necessary.
• You can forward your calls to a traditional analog phone or to another IP phone, although your
system administrator might restrict the call forwarding feature to numbers within your company.
• Call forwarding is phone line specific. If a call reaches you on a line where call forwarding is not
enabled, the call will ring as usual.
• Your system administrator can enable a call forward override feature that allows the person
receiving your forwarded calls to reach you. With override enabled, a call placed from the target
phone to your phone is not forwarded, but rings through.
• Your system administrator can change call forwarding conditions for your phone lines.

Using Do Not Disturb

(SIP phones only.)
You can use the Do Not Disturb (DND) feature to block incoming calls on your phone with a busy
tone.
If you want to...
Turn on DND
Turn off DND
Tips
• When DND is turned on:
The DND blocking feature applies to all the lines on your phone.
–
Received calls are not logged to the Missed Calls directory on your phone.
–
• When DND and Call Forward All are both enabled on your phone, Call Forward All takes
precedence on incoming calls. That is, calls will be forwarded and the caller will not hear a busy
tone.
• If DND is not enabled on your phone, see your system administrator.
24
Then...
1. Press > Device Configuration > Call Preferences >
Do Not Disturb.
2. Select Yes, and then press Save.
"Do Not Disturb" displays on the status line, and a DND
softkey is added.
Press the DND softkey or:
1. Press > Device Configuration > Call Preferences >
Do Not Disturb.
2. Select No, and then press Save.
OL-11526-01