Transferring Calls - Cisco CP-7941G-RF Phone Manual

You can use these additional methods to view multiple calls on multiple lines:
If you want to...
View calls on another
line
Switch to call overview
mode

Transferring Calls

Transfer redirects a connected call. The target is the number to which you want to transfer the call.
If you want to...
Transfer a call without
talking to the transfer
recipient
Talk to the transfer
recipient before transferring
a call (consult transfer)
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified CallManager 5.1 (SCCP and SIP)
Then...
1. Press .
2. Immediately press the line button
Press for the highlighted line.
The phone switches to call overview mode, displaying one call per line. The
displayed call is either the active call or the held call with the longest
duration.
To return to standard viewing mode, press
line button.
Then...
1. From an active call, press Transfer.
2. Enter the target number.
3. Press Transfer again to complete the transfer or EndCall to cancel.
Note If your phone supports on-hook transfer, you can alternately
complete the transfer by hanging up.
1. From an active call, press Transfer.
2. Enter the target number.
3. Wait for the transfer recipient to answer.
4. Press Transfer again to complete the transfer or EndCall to cancel.
Note If your phone supports on-hook transfer, you can alternately
complete the transfer by hanging up.
Basic Call Handling
.
, then immediately press the
21