Description Of Display Keys - Fantini Cosmi KIT CH130ARR2 Instructions For Use Manual

CH130ARR2

DESCRIPTION OF DISPLAY KEYS

1
2
7
6
1 2 3
Note: in 4-pipe plants, when both symbols 4 and 5 light up it indicates AUTOMATIC mode.
With the active minimum sensor function, the symbol 8 or the flashing symbol 9 indicates that the supply water temperature
is outside the set limits. In this case, ventilation is interrupted.
FAN COIL ROOM THERMOSTAT
5
4 5 8 9
CONTROLS
1 Increases the fan speed or sets automatic
ventilation
2 Reduces the ventilation speed or sets OFF
3
mode (thermostat off).
3 Increases the current temperature set point
4
4 Decreases the current temperature set
point
5 Thermostat reset without loss of settings
ADVANCED CONTROLS
Simultaneously pressing the two keys enables the following
settings:
1 and 2 Comfort/Economy mode change
3 and 4 Summer/Winter mode change (pressing >
3 sec)
WARNINGS KEY
1 Measured or set temperature
2 Comfort mode
3 Economy mode
4 Summer mode
5 Winter mode
6 Fan speed indicator (MIN-MED-MAX)
7 Automatic fan mode
8 Fan-coil cooling enabled
9 Fan-coil heating enabled
3