FRAME IT ALL Stack & Extend Manual page 5

JOINING MULIPLE ANIMAL BARRIER KITS
Stacking kits to make a higher barrier – Assemble the kit for the upper level in the same way as for
the lower level except, before installing the gate assemblies, slide a round sleeve, (Part 22) onto the
corner post of the gate, below the gate hinges.
NOTE: Each Animal Barrier kit contains one Part 22, which is not needed unless stacking kits.
Slide the round
sleeve (22)
below the hinge
connector
EXPANDING BARRIER AREA WITH MULITPLE KITS - EXTENSION OPTION 1: PLACING GATES PLACED IN
DIFFERENT AREAS OF THE GARDEN BED
Customer Service: 1800-914-9835 | Customer Service: 1800-914-9835 |
Slide the round sleeve
(22) below the short
sleeve.
To extend your animal barrier
with additional kits, simply
connect them in a loop using
additional vertical poles (Part 20)
and Horizontal Poles (Part 19)
connected with Part 1 & 2 as
shown.
support@frameitall.com support@frameitall.com