Extron electronics MTPX Series User Manual page 51

3. Press and release the Output 1 button (figure 3-40).
Press and release the Output 1 button.
The LED blinks to indicate that this preset
number is selected but not recalled.
1 2 3
1 2 3
Preset 17 Preset 18 Preset 19
NOTE This example shows the action
taken on an MTPX 1616.
Figure 3-40 — Select the preset
4. Press and release the Enter button (figure 3-41). The configuration stored in
memory location 17 is now the current configuration and can be viewed in the
View-only mode (see example 4 on page 3-17).
Press the Enter button to
recall the preset.
CONTROL
ENTER PRESET VIEW
The Enter and Preset LEDs
return to the unlit state.
Figure 3-41 — Press the Enter button
MTPX Twisted Pair Matrix Switchers • Operation
CONTROL
4
ENTER PRESET VIEW
4
Preset 20
The Enter LED blinks to indicate
the need to recall the preset.
The Preset LED remains lit.
ESC
All input LEDs
return to the
unlit state.
3-25