Table of Contents
Advertisement
Matrix Software, cont'd
7.
8.
9.
Figure 5-8 — Firmware loading
10.
11.
C
N The original factory-installed firmware is permanently available on the
12.
5-8
MTPX Twisted Pair Matrix Switchers • Matrix Software
Connect the computer to either switcher serial port. See chapter 2,
"Installation", for more details.
Start the Matrix Switchers Control Program and connect to the
matrix switcher. See "Using the Matrix Switcher Control software" in this
chapter, steps 1 through 4, starting on page 5-4.
Click Tools > Update Firmware... .
The Extron Firmware Loader appears (figure 5-8).
Click Browse. The open file window appears.
Navigate to the folder where you saved the firmware upgrade file. Select the
file and click Open. The Firmware Loader returns to the top.
Valid firmware files must have the file extension ".S19". Any other file
extension is not a firmware upgrade.
MTPX Plus switcher. If the attempted firmware upload fails for any reason, the
switcher automatically reverts to the factory-installed firmware.
Click Upload. The Device Port window appears (figure 5-9).
10
11
Advertisement
Table of Contents
