Table of Contents
Advertisement
Operation, cont'd
4.
N The entire set of ties can be canceled at this point by pressing and releasing the
1
Figure 3-7 — Select the outputs
5.
Figure 3-8 — Press the Enter button
Figure 3-9 — Example 1, final configuration
3-12
MTPX Twisted Pair Matrix Switchers • Operation
Press and release the Output 3, Output 4, and Output 8 buttons (figure 3-7).
Esc button. The Esc LED flashes once.
Press and release the Output 3, Output 4,
and Output 8 buttons.
The LEDs blink to indicate that the selected
video and audio input will be tied to these
outputs.
2
3
4
5
OUTPUTS
Press and release the Enter button (figure 3-8).
Press the Enter button to confirm
the configuration change.
The Enter LED and all input LEDs and
output LEDs return to the unlit state.
ENTER
The current configuration (figure 3-9) is now:
•
Input 5 (video and audio) is tied to output 3, output 4, and output 8.
Input 5 (video/audio) tied
to outputs 3, 4, and 8
Input
5
3
Output
4
8
6
7
8
ENTER PRESET
The Enter LED blinks to indicate
the need to confirm the change.
Video
Audio
Advertisement
Table of Contents
