Table of Contents
Advertisement
5.5
REMOTE COMMANDS
5.5.1
SET
SET is used to assign values to program registers. The SET command has two fields separated by a comma: the register
and the operand. The register is the desired programming field to be programmed. Refer to the DLTM programming pages
for the allowable register names and values for each field.
Example:
SET CLOCK, EXTERNAL
5.5.2
READ
READ is used to interrogate values saved in program registers. The READ command has one field to designate the
register. The register is the desired programming field to be interrogated. Refer to the DLTM4 programming menus for
the register field names.
Examples:
READ CLOCK
READ PROG1 will return the PCM line 1
5.5.3
HELP
Issuing the HELP command to the DLTM4 after it is selected by using the SLOT command to select the module.
5.5.5
SAVE/LOAD
The SAVE command saves the current settings to the preset group number specified by the PRESET number. The LOAD
command retrieves and replaces the current program with the settings from the preset group number specified by the
PRESET number.
Example:
set preset=1
save
set preset=2
load
5.6
COMMAND DEFINITIONS
Field
CLEAR
FREEZE
UPDATE DISPLAY
ERROR
SLIP
START ZERO
STOP ZERO
STATUS
rd
210 South 3
Street, North Wales, PA 19454
Tel: 215.699.2060 Fax: 215.699.2061
Table 12: Total Instruction Set
Returned Value / Comments
Clear received bit counter and accumulated error data.
Freeze received bit counter and error accumulation data. Consecutive
Freeze commands update accumulated data values to the current values
with no further accumulation.
Set received bit counter and error accumulation to continuous run mode.
Insert a single error into the data stream
Insert a single bit slip into the data stream
Start insertion of continuous zeros into the data stream.
Stop insertion of continuous zeros into the data stream.
Returns SYNC status, SYNC, NO SYNC, NO DATA, NO CLOCK
09.21.2017
18
Found in
Sub-Menu
Figure 8
Figure 8
Figure 8
Figure 8
Figure 8
Figure 8
Figure 8
A
L
, I
.
POGEE
ABS
NC
Advertisement
Table of Contents
