Measurements Menu; Figure 8: Status Menu; Table 3: Selectable Definitions Of The Actions Field On The Status Screen - Apogee 2349 DLTM4 Instructions Manual

AL6300 DATA LINK TEST SET PRODUCT LINE
5.4.1

MEASUREMENTS MENU

The initial screen that the DLTM4 comes to is the Measurements Menu. The Measurements menu is depicted in Figure 8.
The Measurements Display provides status of the currently running test. The Clear (F5) button clears out any current
measurements and allows the test to continue running. The action field is associated with the send button. The action field
allows the user to select between different actions to perform during a test. The table bellows describes the actions.

Table 3: Selectable Definitions of the actions field on the Status Screen

Selectable Function
Insert Error
Insert Slip
Start Zero
Stop Zero
Force Resync
Freeze Display
Update Display
Test link delay
Pressing the send button on the touch-screen performs the actions in the action field.
The other fields on the right (F1-F4) bring up the screen for different menus. See the following sections for descriptions
of these screens.
A L , I .
POGEE ABS NC
Figure 8: Measurements Menu
Definition
Invert a single bit in the output bit stream
Cause a bit slip resulting in loss of receiver lock
Force the output stream to all Zeros
Restore normal output data stream
Force the receiver correlator to resynchronize
Freezes the current values on the display
Restores the measurement process
Initiates the data link delay process – Only valid for PRN on a "Clean Link."
7
09.21.2017
MODEL 2349 DLTM4
F1
F2
F3
F4
F5
rd
210 South 3 Street, North Wales, PA 19454
Tel: 215.699.2060 Fax: 215.699.2061