Download Print this page

F&F LE-03MB v2 Manual

Electric energy meter, 3-phase

Advertisement

Quick Links

LE-03MB
Electric energy meter,
3-phase
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collecti on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Compliance
Directive MID
Certificate number
Purpose
The LE-03MB is a static (electronic) calibrated AC electricity me-
ter for single-phase or three-phase direct current. It is used for
indication and registration of consumed electricity and parame-
ters of the power supply network with the possibility of remote
reading of indications via a network compliant with the M-Bus
standard. The meter is configured via the configuration menu
accessible from the front panel and via the communication port
in accordance with M-Bus software functions.
Operation and programming manual
Detailed PDF instructions and MID declaration can be down-
loaded from the website: www.fif.com.pl from the product sub-
page.
F&F Filipowski L.P.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
v2
2014/32/EU
0120/SGS0215
- 1 -

Advertisement

loading
Need help?

Need help?

Do you have a question about the LE-03MB v2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for F&F LE-03MB v2

  • Page 1 F&F Filipowski L.P. Konstantynowska 79/81, 95-200 Pabianice, POLAND phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71 www.fif.com.pl; e-mail: biuro@fif.com.pl LE-03MB Electric energy meter, 3-phase Do not dispose of this device in the trash along with other waste! According to the Law on Waste, electro coming from households free of charge and can give any amount to up to that end point of collecti on, as well as to store the occasion of the purchase of new equipment (in accordance with the principle of old-for-new, regard-...
  • Page 2 Functions » 1-phase or 3-phase system (3- and 4-wire); » 2-way metering (4-quadrant); » Indication of kWh/kvar (input/output); » Indication of mains parameters; » MID compliance; » M-Bus protocol; » Pulse output SO (×2); » Backlit LCD multifunction display; » Meter configuration protected by password. Measured values Active energy consumed [kWh]...
  • Page 3 Pulse output The indicator has the 2 pulse outputs. This allows you to connect a pulse meters-reading pulses generated by the counter. For proper operation of the indicator is not required to connect additional devices. Sealing The meter has sealable input and output terminal covers to pre- vent any attempts to bypass the meter.
  • Page 4 Meter number The meter is marked with individual serial number allowing its unambiguous identification. The marking is laser engraved and cannot be removed). Front description - 4 -...
  • Page 5 Dimensions - 5 -...
  • Page 6 Wiring diagram 1-phase 2-wire system - 6 -...
  • Page 7 3-phase 3-wire system - 7 -...
  • Page 8 3-phase 4-wire system - 8 -...
  • Page 9 Technical data rated voltage 3×230/400 V minimum measured current 0.02 A base current maximum current 100 A voltage measuring range 100÷289 V AC 173÷500 V AC measurement accuracy (EN50470-1/3) B class rated frequency 50 Hz overload 30×Imax/10 ms insulation 4 kV/1 min; 6 kV/1,2 µs insulation protection class housing PC+ABS material...
  • Page 10 working temperature -25÷55°C terminal low-current 25 mm² screw terminals high-current 2.5 mm² screw terminals dimensions 4 modules (76 mm) mounting on TH-35 rail ingress protection IP51 Warranty F&F products are covered by a 24-month warranty from the date of purchase. The warranty is only valid with proof of purchase. Contact your dealer or contact us directly.
  • Page 11 General work safety conditions » Please read the instructions carefully before installation. » The device should be installed and operated by qualified per- sonnel who are familiar with its design, operation, and asso- ciated risks. » Do not install a meter that is damaged or incomplete. »...