7
Powering On and Starting the UPS
User interface (UI) snapshots shown in this document correspond to V100R001C10SPC700 and
are for reference only. If
any UI changes are made, contact Huawei technical support to obtain the latest snapshots.
Symbol
Description
A
Press A.
A
B
Press A and then B.
Indicates omitted screens.
7.1
Powering On the UPS
Check that the UPS has passed all check items described in
chapter 6
Switch on the external battery circuit breaker if any.
Switch on the upstream UPS mains and bypass circuit
breakers (K1, K
Switch on the output circuit breakers (Q, Q1, and Q2).
The initialization screen is displayed.
"Verifying the
Installation."
Start the UPS in normal
or bypass mode?
Yes
1, and K
1) based on site requirements.
m
b
Remarks
A and B indicate the operation
symbols on the UPS control panel.
-
No: Cold-start the UPS
using batteries.
13
Press