Start
Set Voltage level.
Set Negative
batteries.
On the default screen, hold down
button when you hear a beep sound. The inverters are started.
End
The following uses three-phase input and three-phase output of the UPS in normal mode as
an example.
The parameter setting screens are shown as follows.
Scenario 1: Initial Startup
Set Language (default: English), System Parameters, and Battery Parameters.
Set Language
Set Frequency
level.
Set Battery
capacity.
for more than 5 seconds. Release the
Incorrectly setting battery parameters compromises battery
safety and battery backup time.
For details about parameter settings, see the
kVA–20 kVA) User Manual
15
Set Output mode.
Set Positive
batteries.
UPS2000-G-(6
.