Supplying A Clock To The Evaluation Mcu; Figure 2.6-1 Clock Peripheral Circuit - Fujitsu MB2145-507 Hardware Manual

2.6

Supplying a Clock to the Evaluation MCU

Select the clock to be supplied to the evaluation MCU using the clock switch and
secondary clock supply jumper on the top of the emulation pod as shown in Figure
2.6-2 and Table 2.6-1.
Supplying a Clock to the Evaluation MCU
CAUTION
Prohibition
Before operating the clock switch, turn off the power.
Failure to do so may cause an electric shock.

Figure 2.6-1 Clock Peripheral Circuit

2.6 Supplying a Clock to the Evaluation MCU
23