Connecting The External Probe; Figure 2.4-1 Connecting The External Probe - Fujitsu MB2145-507 Hardware Manual

CHAPTER 2 CONNECTION AND SETTINGS
2.4

Connecting the External Probe

Connect the external probe to the external probe connector on the front of the
emulation pod.
Connecting the External Probe
20
CAUTION
Prohibition Before connecting or disconnecting a cable, turn off the power.
Failure to do so may cause an electric shock.
When disconnecting a cable, hold the cable by the connector case.
Do not pull on the cable.
Doing so may break a wire in the cable.

Figure 2.4-1 Connecting the External Probe