Table of Contents
Advertisement
2)
Unlike in other instructions, pressing the ENTER button will toggle between { IdSP} for normal
and {dSPI} for reversed.
3)
Press the MENU button to confirm or leave alone for 8 seconds.
Fixture Test and Service Functions {teSt}, {FhrS}, {rSet}
F I XTURE SEL F-TEST { te St }
The test sequence will run through all of the projection capabilities of each individual fixture, including
gobo and color effects.
1)
Tap the MENU button until the display reads {teSt}.
2)
Press ENTER and the fixture will immediately begin to play back a test sequence. Observe
tentatively for any abnormalities.
3)
Press the MENU button to leave this mode.
F I X T U R E R E S ET { r Se t }
This function will re-initialize the fixture by returning all motors to its startup positions or otherwise
known as (home position).
1)
Tap the MENU button until the display reads {rSet} and press ENTER.
FIXTUR E HOUR S {FhrS}
The (fixture hours) readout displays the number of hours the fixture has been in use. It is not
uncommon to find new fixtures with a few logged hours. This means the fixture was thoroughly tested
prior to delivery.
1)
Tap the MENU button until the display reads {FhrS}.
2)
Press ENTER to view the total working hours.
3)
You can leave alone and the display will return to the regular menu or press MENU button to
return to main menu.
ST-200X User Manual
11
Operating Instructions
Revision: 2004-11-02/11:00
Advertisement
Table of Contents
