User Configurations (Examples); To Set The Pan To Inverting Or Non-Inverting; To Set The Tilt To Inverting Or Non-Inverting; Service Functions - Chauvet Q-Spot 300 User Manual

User Configurations
T O SET T H E P A N T O I N V ER
1) Press the <MEN
2) Scroll through un
3) Scroll through un
4) Scroll through
5) Press <EN
T O SET THE T I L T TO
1) Press the <MENU
2) Scroll through
3) Scroll through
4) Scroll through un
5) Press <ENTER> again to save this setting.
Service Fun ctions
T O R ES E T T H E F I XTU R E
1) Press the
2) Scroll thro
3) Scroll throug
4) Scroll through un
5) The fixture will n w reset.
T O TURN TH E LAMP ON
1) Press the <MENU
2) Scroll through u
3) Scroll through un
4) Scroll through u
5) The lamp will now
Note: if the lam
the lamp is cool
Q-Spot 300 User Manual
T ING OR NON- IN VERT ING:
U > button to access the display.
til "2-Invert" is displayed and select it by pressing <ENTER> .
til "2.1-Pan" is displayed, and select it.
un til the desired setting is displayed ("Normal" or "Reverse") and select it.
TER> again to save this setting.
I N V ER TING OR NON- IN VERTING:
> button to access the display.
un til "2-Invert" is displayed and select it by pressing <ENTER> .
un til "2.2-Tilt" is displayed, and select it.
til the desired setting is display
:
<MENU > button to access the display.
ugh un til "1-Info" is displayed and select it by pressing <ENTER> .
h un til "1.2-Reset" is displayed, and select it.
til "Yes" is displayed and select it.
o
O R OFF :
> button to access the display.
n til "1-Info" is displayed and select it by pressing <ENTER> .
til "1.3-Lamp" is displayed, and select it.
n til the desired setting is displayed ("On" or "Off) and select it.
turn on if you selected "On", or turn off if you selected "Off".
p is still hot, it may not turn back on immediately. The fixture will wait until
before tur ning it on, even if you select "On" in the control panel.
20
ed ("Normal" or "Reverse") and select it.
8/27/2007 5:35 PM