Table of Contents
Advertisement
Operation
Stand-Alone Mode (Sound-Active, Auto Mode):
This mode allows a single unit to run to the beat of the music, or the unit will auto change in Auto
Mode.
1)
Press <MENU> repeatedly until
2)
Scroll through using the <UP> and <DOWN> buttons until
3)
Press <MENU> repeatedly until
3)
Scroll through and select the desired mode.
Active mode.
Master/Slave Mode (Master Sound, Master Auto):
This mode will allow you to link up to 32 units together without a controller.
1)
Use standard DMX cables to daisy chain your units together via the DMX connector on the rear
of the units. For longer cable runs we suggest a terminator at the last fixture. For more
information about terminators, see page 9.
2)
Choose a unit to function as the Master. Press <MENU> repeatedly on the Master unit until
2)
Scroll through using the <UP> and <DOWN> buttons until
3)
Press <MENU> repeatedly until
4)
Scroll through and select the desired mode.
Active mode.
5)
On the Slave fixtures, Press <MENU> repeatedly on the Master unit until
displayed and select it by pressing <ENTER>.
6)
Scroll through until
DMX Mode
This mode allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, please read the DMX Primer on page 18.
1)
Press <MODE/ESC> until
2)
Use the <UP> and <DOWN> buttons to select the desired address and press the <ENTER>
button.
LG-80 User Manual
is displayed and select it by pressing <ENTER>.
is displayed and select it.
is displayed.
14
is displayed and select it by pressing <ENTER>.
is displayed and select it.
is displayed and select it by pressing <ENTER>.
is Auto mode,
is displayed and select it.
is displayed and select it by pressing <ENTER>.
is Auto mode,
is Sound-
is Sound-
is
2007-07-16/11:07
Advertisement
Table of Contents
