Universal Dmx Control (Dmx Mode) - Chauvet Scorpion Scan LG-60 User Manual

Universal DMX Control (DMX Mode):

This mode allows you to use a universal DMX-512 controller to control lasers operation and effects.
1) To control your fixture in DMX Mode use standard XLR DMX cables to daisy chain your units
together via the XLR connector on the rear of the units. For long cable runs we suggest a
terminator on the last fixture.
Mode
DMX mode
2) Assign a DMX address to the unit by following the dipswitch chart.
3) Use DMX controller to control your units.
DMX-512
Note! System doesn't use DMX controller in Master-Slave Mode.
System may not set to two Master units in Master-Slave Mode.
LG-60 User Manual
Dipswitches
10 = On, 11 = Off, 12 = On
OUT
1: DMX
12
IN
2: DMX
Appendix
POWER
N: DMX
11/14/2007 6:04:00 PM