Advertisement
Operate requires simple selection from three push-button switches. One
button scrolls through all available resolutions and refresh rates (labeled
OUTPUT MODE). The other 2 buttons (labeled + and -) are used to
select the 28 available test patterns.
As an alternative to scrolling through all resolutions, you may quickly
"jump" to known resolution/refresh rates by simultaneously pressing two
buttons. Pressing the left two jumps directly to XGA at 60 Hz. Pressing
the right two jumps directly to 480p (a standard HDTV mode).
Note that in HDTV modes, the DVI OUT will always provide the proper
signal. The VGA (HD15 pin) connector will provide Component Video
(with sync on Y) if the slide switch is in the YPbPr position. In the RGB
position, this connector provides standard PC format VGA output.
The following chart lists the output resolutions in the order that the Mode
button scrolls. The on screen display will indicate this mode.
VGA
SVGA
XGA
WXGA
SXGA
480P
576P
720P
1080i
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
PC Resolutions
640 X 480 @ 50/60/72/75/85 Hz
800 X 600 @ 50/56/60/72/75/85 Hz
1024 X 768 @ 50/60/70/75/85 Hz
1280 X 768 @ 50/60 Hz
1280 X 1024 @ 50/60 Hz
HDTV Resolutions
720 X 480 @
50/60
720 X 576 @ 50/60 Hz
1280 X 720 @ 50/60 Hz
1920 X 1080 @ 50/60 Hz
---- (Quick Select)
Hz
---- (Quick Select)
Advertisement
