Choosing A Vehicle Seating Position And Preparing To Install The Booster Car Seat; Vehicle Seat Location Requirements; Incompatible Vehicle Seat Belts - KIDDY Cruiser Fix Pro Instruction Manual

4. Choosing a vehicle seating position and preparing to install
the booster car seat
WARNING
!
• Do not use this booster car seat in a front seating location or seat with
front, side or seatbelt airbag unless recommended by the vehicle
manufacturer in the vehicle owner's manual.
• Always read the vehicle's owner manual on how to use child restraint
systems/booster car seats in the vehicle or contact your dealer to make
sure that you follow the instructions of the vehicle's manufacturer.
• Some vehicles have no seating positions which are compatible with this
booster child seat or any other child seat. If in doubt, contact the vehicle
manufacturer for assistance.
• Some types of vehicle belts are NOT compatible with this booster car seat.
• The entire underside of the booster car seat must lie fully on the vehicle
seat. Do not place anything (e.g. cushions) under the booster car seat.

4.1 Vehicle seat location requirements:

Fig. 1
DEATH or SERIOUS INJURY can occur
According to crash statistics, the National
Highway Traffic Administration recommends
children 12 and under are safer when properly
restrained in the rear seating positions than in
the front seating positions. Use a vehicle rear
seating position whenever possible (Fig. 1).
In vans and minivans it is particularly important
to ensure that the booster car seat installed in
an easily accessible seat in the event that
third-party rescue is required.
For use in a motor vehicle, please follow the
manufacturer's
vehicle manual, or contact your vehicle dealer
(Fig. 1).
6
recommendations
ENG
in the