Table of Contents
Advertisement
8.1
Manufacturer's Declaration
and applies under the condition that it is properly installed, used and maintained in
accordance with the relevant safety regulations and the manufacturer's instructions in
accordance with the intended use.
We hereby declare that this product complies with the provisions of the following EC
directives: EWGRL 89/336 and EWGRL 98/37
This statement applies to all copies produced after the production documents in accordance
with EBSUP16169912.
A certified institute was tasked with EMC testing.
The following standards were used for the assessment of the product with regard to
electromagnetic compatibility:
DIN EN 61000-6-2: 2005 (as per VDE 0839 part 6-2 / March 2006), as well as
DIN EN 61000-6-3: 2007+ A1: 2011 (as per VDE 0839 part 6-3 / September 2011)
We point out that:
the manufacturer's declaration and thus the approval shall expire if this product is
changed without prior consultation with us.
Non-professionals have the conditions of the area of operation and the resulting
requirements reviewed and approved by experts before initial commissioning.
with devices that fall under the EMC Directive, an initial commissioning may only take
place after the conformity with its provisions has been established.
with machines/plants that fall under the Machine Directive, an initial commissioning may
only take place after the conformity with its provisions has been established.
On request, we will provide test copies of the EMC tests.
Technisches Handbuch
Version 5.2
Manufacturer's declaration
This statement is used for the following designated products:
VOE IO Box
4 channel lighting control with PWM brightness control
and 6 control inputs.
This declaration is the sole responsibility of
KELLER Elektronik GmbH
Liebigstraße 33
74221 Leingarten
Legally binding signature of the manufacturer 08 April 2014
ELR4
Germany
Attachment
33
Advertisement
Table of Contents
