Vision tools 09V0002B Technical Manual page 21

TMR/RTMR Duty cycle of the outputs OUT1...4 with hardware trigger
Write:
TMR1<TIME>
_TMR1<TIME>
TMR1<0...9999>
TMR2<xxxx>
TMR3<xxxx>
TMR4<xxxx>
Read:
RTMR1
RTMR2
RTMR3
RTMR4
PWM/RPWM Changes the brightness value Outputs OUT1...4
Write:
PWM1<brightness
value>
_PWM1<brightness
value>
PWM1<0..100>
PWM2<0..100>
PWM3<0..100>
PWM4<0..100>
Read:
RPWM1
RPWM2
RPWM3
RPWM4
PWM0 Simultaneous changing of the brightness value outputs OUT1...4
Write:
PWM0<PWM1,PWM2,PWM3,PWM4>
_PWM0<PWM1,PWM2,PWM3,PWM4>
PWM01<0..100,<0..100>,<0..100>, <0..100>
Technisches Handbuch
Version 5.2
Answer: none
Answer: „ACK"
0..9999 ms Trigger timer for OUT1
Duty cycle for OUT1 at CFI1<1,1,0..1> or CFI1<1,2,0..1>
see TMR1<xxxx>
see TMR1<xxxx>
see TMR1<xxxx>
Answer: TMR1<0..9999>
Answer: TMR2<0..9999>
Answer: TMR3<0..9999>
Answer: TMR4<0..9999>
Answer: none
Answer: „ACK"
0..100% Brightness for Out1.
0..100% Brightness for Out2.
0..100% Brightness for Out3.
0..100% Brightness for Out4
Answer: PWM1<0..100>
Answer: PWM2<0..100>
Answer: PWM3<0..100>
Answer: PWM4<0..100>
Technical data
Answer: none
Answer: „ACK"
0..100%
Brightness for
OUTx.
19